200mm Heavy Duty Castor Wheels 3600kg Industrial Swivel Wheels

fixed rigid flange nylon caster wheels outdoor Industrial casters KT-PH60T-200

Caster maintenance

The user is responsible for the proper maintenance and operation of wheeled equipment. Improper

use or overload shall be avoided. When the goods are very heavy, they shall be placed on the

vehiclewith care. High speed driving on rough roads or heavy objects hitting the wheels will cause

damage to the wheels or equipment. Therefore, please check the support and fasteners regularly:

tighten the loose axle and nut, and check whether the weld or support plate is damaged. Overloading

or impact can cause distortion of the support. The twisted support makes the heavy load tilt and press

on individual wheels, resulting in premature wheel damage. If it is an insert bar caster, tighten the nut

or rivet it firmly, and ensure that the equipment installation support is not bent and the insert bar is

installed correctly. When installing casters, lock nuts or lock washers should be used. The expansion

plug-in caster shall be installed to ensure that the plug-in rod is firmly installed in the casing.

Lubrication: add lubricating oil regularly, and the wheels and movable bearings can be used for a long

time. Applying grease to the friction parts of axle, sealing ring and roller bearing can reduce friction and

make rotation more flexible. Normally, lubrication shall be carried out every six months. The wheels of the

car should be lubricated after monthly cleaning.

Wheels: visually inspect the wheels for wear. The poor rotation of the wheel is related to fine red, rope

and other sundries. The anti entanglement cover can shade the entanglement of these sundries. Loose

or tight casters are another factor. Replace damaged wheels / casters to avoid unstable rotation. After

checking and replacing the wheel, ensure that the axle is tightened with locking gasket and nut. Because

the wheel axle is loose, it will cause friction and jamming between the wheel width and the support.

Replacement wheels and bearings shall be provided to avoid shutdown losses.

Casters: if the movable steering is too loose, it must be replaced immediately. If the caster center rivet is

fixed by nut, it must be firmly locked. If the movable steering cannot rotate freely, check the ball for

corrosion or dirt. If fixed casters are installed, ensure that the caster support is not bent.

Industrial castors MC nylon wheels have been used for a long time, and there will be some impurities or

iron pins on the tire surface. The cleaning methods of Hanke castors are summarized as follows:

1. Check the visual wear degree of tire surface. The "grinding point" of the tire surface can indicate the

accumulation of foreign matters, such as thread, iron wire and other sundries may wind around the wheel.

Take out the bolts and nuts on the wheel and clean up the sundries. Check whether the wheel bearing is

damaged. If the parts are not damaged, they can be reassembled and continue to be used. If the wheel

is often entangled by sundries, it is recommended to assemble an anti winding cover to avoid it.

2. If impurities are stuck on the casters, it is easy to form footprints on the road after walking. You can

clean them with industrial scrub hand sanitizer or diesel oil.

Heavy Duty Swivel Casters Parameter

Heavy Duty Swivel Casters Describe

Heavy Duty Swivel Casters Size

Heavy Duty Swivel Casters Material

Heavy Duty Swivel Casters Scope of application

Application.

About us.

KTC.